Hobbywing Ezrun MAX5 ESC & 800KV 56113SL Brushless Motor Combo for 1/5 scale cars
The Ezrun series offers numerous sensorless brushless systems for ambitious hobby racers and those who want to become one. They are the ideal choice when it comes to replacing your RTR equipment with high-quality electronics with a lot of entertainment content.
The Max5 is the perfect choice for 1/5 scale monster trucks that want more power. Suitable for up to 8S LiPos, it can get the most out of all sensorless motors. The extremely powerful BEC supplies the receiver as well as the servos with more than enough power. The electrical switch is extremely robust and reliable, thanks to the special cooling system, the controller always runs in an optimal temperature range.
The set consists of the following components:
- Controller Ezrun MAX5 200A 3-8s for 1/5
- Electric motor Ezrun SL 56113 800kV for 1/5
- Suitable for all weather conditions
Excellent sealing against water and dust make this regulator a weapon in any weather or under any conditions. Regardless of whether it's extremely dusty slopes, wet roads, snow, puddles or gravel, the MAX5 keeps going.
- Advanced and safe electronic switch
This electronic switch has a lifetime of more than 50,000 switching operations and is also completely waterproof and dustproof and also has a shock-resistant design. This means that problems such as rusty contact points or moisture in the switch are a thing of the past. Nor can it switch itself off after hard landings or accidents like a conventional mechanical switch.
- Super built-in BEC
The world's first controller with built-in super high current BEC which has a max. Can provide output power of up to 25A. In addition, the output voltage can be set between 6V & 7.4V. The high current BEC was developed to supply the current high current servos with sufficient power on request and thus to be able to control large models precisely.
- Plug & Play
Equipped with 6.5mm gold contact sockets as standard, the plugs of most brushless motors can be plugged into the controller. The widely used Traxxas connector is already soldered on the battery side, so in most cases the annoying soldering is no longer necessary and the controller can be put into operation immediately.
- Large area of application
This controller can be ideally used in every 1/5 model, whether buggy, monster truck, short course or truggy. For example in the HPI Baja, Losi 5T, Losi DBXL or MCD Race Runner, which were converted to brushless with a conversion kit. It is the ideal choice for high-end models that are heavily challenged or operated aggressively.
- Almost maintenance-free
The entire controller, with the exception of the fan, is basically maintenance-free. Only the fan cover has to be removed to replace the fan if necessary. It is therefore not necessary to open the housing or the like and the whole process can be carried out quickly and smoothly. In addition, the fan has been designed to be shockproof so that it can withstand regular high jumps and hard landings without damage.
MAX6 ESC specification:
Cont./Peak Current: 200A/1300A
Motor Type: Sensored / Sensorless Brushless Motor (only in sensorless mode)
Applications: 1/5th Touring Car, Buggy, Truggy and Truck
Motor Limit: With 8S LiPo/24S NiMH: KV ≤ 1000 (58110 size motor)
LiPo/NiMH Cells: 9-24S NiMH, 3-8S LiPo
BEC Output: 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC)
Cooling Fan: Powered by the stable BEC voltage of 6V/7.2V
Connectors: Input End: No, Output End: Female 6.5mm Gold Connectors (pr e-soldered onto the PCB of the speed contr oller).
Size/Weight: 93.35(L) x 58.12(W) x 47.81(H) / 342g
Programming Port: FAN /PRG Port
800KV Motor Specifications:
KV Rating: 800KV
LiPo Cells: 3-8S
No-load Current (A): 3.2
O.D: 56 mm
Length: 113 mm
Shaft Diameter: 8 mm
Weight: 1210 g
Applications: 1/5th & 1/6th RC Vechiles